WITH EXHAUST HOSE
Window
This type is used when there is a window that can be opened or if a 4 inch hole can be drilled in the wall. The exhaust hose is placed in the window to blow out the hot air. Sometimes foam rubber is made to measure to close off the window opening. It is however not necessary.

Hose
Maximum of 5 ft/ 1,5 meter for 99% of all airco's. The airco is next to window. Extending the exhaust hose further, means more heat radiates from the hose back in the room.
Capacity
From 2,0 to 2,6 KW. If more cooling capacity per opening window is needed a tow-part airco is recommended.

Dehumidification
Almost as important as temperature is humidity. The airco blows out the majority of the hot water vapour. part of it will condens. This condens will either enter a small hose or a reservoir, which needs emptying from time to time.
Energy consumption
At full power the consumption is 800 watt. Extension cords should not be used.
The needed fuse is only 4A. The airco kan therefore be connected to all standard wall power sockets.
Instruction
On/off button. Two speed fan. Delonghi-model has separation dehumidification button without cooling. Simple.

Models for hire